Tuesday, May 31, 2011

Slik Sprint Pro II GM Tripod with Ballhead


I was looking for a nice cheap and lightweight tripod when my $20.00 tripod snapped with my 50d in it. Good thing it fell on the carpet and not on concrete.

I was browsing online which tripod is good on a $50.00-$100.00 range. Alas, I found this on the BH photo website.

The ballhead was ok for light use. If you are using a monster lens such as the 70-200, I suggest you buy a ballhead that can handle a heavier load. So I basically sold the ballhead that came with it and bought a better one. I will review that next.

Fully extended, the tripod actually isn't bad at all. It still is pretty stable. The only complaint I have about it is that when the legs are not extended and the camera is in portrait position the tripod has a tendency to tip over. You can fix this by adding a counter weight on one leg. Other than that...it is a best buy for this price range.

The tripod legs can also be folded to make it really low to the ground, very useful for macro shots.

Portability is a neat feature of this tripod. It's actually shorter than my $20.00 tripod because of the ballhead. I just put it in my camera bag's outer pocket and I'm all ready to go.

If you are looking for a tripod that is really sturdy for the price...get this one. You'll never regret it.

Get it from here.

As always BH photo never fails to give you the best service for photo and video equipment.

The tripod image is from the BH photo video website.

Wednesday, May 18, 2011

Front, side, and backlighting a subject

Flash photography is an ever evolving art. It requires mastery of lighting techniques, positioning, and applying the theory and science of light into your photographs. It is a never ending quest to experiment and to keep on trying the best ways to apply flash in a photograph.

I started photography using my pop up flash. Then I bought a speedlite, then I bought a studio light, then I bought another...and another...and then I realized, I really don't need that much lights at all. All I needed to do was position the lights that I get the results that I wanted. I've learned that the fewer the lights, the more dramatic the lighting will be.

I started photographing flowers years ago and I admit it is really addicting, especially if you get your lighting right. So I started doing experiments with my lighting. I was kinda tired of using the usual 2 lights in the front setup . It produced a rather flat, commercial type of lighting. The usual "everything is lit up like crazy lighting". I started to backlight my subject, and also tried lighting them from the sides. Anything just to get away from the usual...and boy did I get results.

When doing this, make your lighting uneven as possible. Or you can setup a ratio between your main light and your fill light or backlight, for example having a 1:1 lighting ratio between the main light and the fill light means that the power of both flashes is even, which would make the lighting flat. If you set up a 2:1 ratio, that will mean that the main light will have twice the power of your fill light. A 4:1 ratio means that your main light will have four times the power of your fill light and so on.

Start with a simple one light in the front and one light on the side approach. Make your front light your main light and the side light your fill, or try reversing it.

Here's what I got for that setup:













Here's the result of backlighting a subject and having the light in the front less powerful than the backlight:













and here's the result of having a light above the subject at 45 degrees, and then having the main light on the right side of the subject:



















The trick is to experiment. Be crazy, be creative!

Saturday, May 7, 2011

The ND filter


Ever wonder how photographers do those slow speed waterfall shots with smooth flowing water on broad daylight? Of course they do it with really slow shutter speeds, but a slow shutter speed means letting more light in, which means if you are photographing a waterfall at noon when the sun is high the light levels are so high that you end up overexposing your photo. Sometimes even when you close your aperture to like f18 or more, you still get parts of your photo overexposed. Although closing the aperture that much or more with a non full frame camera causes diffraction, it is not really advisable.

The solution to this is using a filter called a Neutral density filter. A neutral density filter is a filter that limits the light coming in to your cameras sensor. It's like sunglasses for your eyes. Neutral density filters are supposed to be neutral in color. They are not supposed to shift color or put a color cast in your images, that's why they are called neutral.

The degree of light transmission is determined by the number following the ND label. For example, ND2, ND4, ND8 and so on. An ND2 means the light coming through is 50%, while an ND4 means the light coming through is 25%, an ND8 by 12.5%...and so on. There are also ND filters that are adjustable...although those cost around like $100 or more. They basically work like circular polarizers.

So basically go up to a waterfall, snap your nd filter into your lens, set up your camera on a tripod, then tweak your settings. Meter your exposure with your ND filter on. Set your shutter speed to a second or slower and then adjust your aperture without overexposing your image. Better yet, set your camera to shutter priority to make things easier. Bracket your shots if necessary. Remember, the slower the shutter speed, the smoother the water flow will look.

ND filters can also be used in a studio to achieve maximum depth of field from a wider aperture with very powerful lights. It also allows you to minimize your shutter speed outdoors if you are using a flash so you stay below the flash sync speed limit.

Here are some of my shots using an ND filter:

Tuesday, May 3, 2011

The beauty dish



I was working one time in our studio at work when our photographer showed me this light modifier called a beauty dish. It was this piece of aluminum (I think) shaped like a pan, with another piece of aluminum in the center of it. It snapped directly to the lights that we were using and our photographer used it to photograph products. One time we had a model, he used it to highlight the edges of the model from the side. I kinda liked how it highlighted parts of the subject so I decided to get one myself.

I ordered one online. I ordered the dish that snapped on the speedlites instead of the studio lights. It was around $40.00 plus shipping. It arrived within a week.

Looking at it after grabbing it from the box, the beauty dish seemed to be well constructed. Not flimsy and fragile at all. Assembly was required but it wasn't that hard. So I ran up my studio and snapped it on one of my speedlites. It held my speedlite pretty good. I then attached it to my light stand to try it out.

The beauty dish gives you this lighting that is kind of unique. It gives you highlights where you want it. It actually makes your highlights more pronounced than a softbox, but softer than a snoot or a barebulb. So the highlight level is in between very soft and very harsh. It gives the portrait more pop without burning out the highlights. Similar to the effect of compressing your highlights and shadows in the levels adjustment in photoshop. I guess the aluminum piece in the center prevents the highlights from being blown out while giving you that pop that you wanted in portraits.

I am very pleased with the results actually. For portraits, the beauty dish is one light modifier you should have in your arsenal.

Sunday, April 24, 2011

The Kenko 1.4x DGX 4



The Kenko 1.4x DGX is a pretty cheap alternative to the Canon version. So far I have no complaints about it. It's one of my most important accessories for taking outdoor shots. For around $120 it is a steal. It includes the front and end cap and a bag. Image quality is pretty good. I recommend it. But what basically is a teleconverter?

One of the most important tools that photographers use is the teleconverter. Teleconverters are basically extenders for your lenses. A 1.4x teleconverter means that it multiplies your range to 1.4 times. A 2.0x teleconverter doubles it. So a 200mm lens with a 1.4 teleconverter will become a 280mm, and it becomes a 400mm with a 2.0x. It is way cheaper to buy teleconverters than buying lenses with greater focal lengths, and also it allows you to still use your favorite lenses that you already have. So what's the catch?

Teleconverters slow down your lenses...you'd lose 1 stop with a 1.4x teleconverter and 2 stops with a 2.0x. So your f2.8 lens will be an f4 lens with a 1.4 teleconverter, and it will be an f5.6 with a 2.0 teleconverter. I opted to get a 1.4 instead of the 2.0 because 2 stops is a lot to lose in my opinion.

Teleconverters also have an effect in your lens focus speed. You need that extra focus speed when photographing flying birds or that tennis player that's running around in the court. I use a teleconverter for my 70-200 IS USM lens and considering it has a fast focus motor, I feel that the speed is greatly reduced when I use my teleconverter.

Another downside to using them is the image quality. Anything that you add on to your lens optically diminishes the quality of it, that extra glass will have an effect on the quality. Extension tubes though are different because they only increase the distance of your lens to your sensor and they don't have extra glass in them...they are just tubes. With teleconverters, expect more chromatic aberrations on your images. Also you can only use these on lenses that are 50mm and longer.

They are cheaper though than buying the actual lens with the same focal length. It's also lighter to bring than bringing that extra lens.

All in all, it's up to you if a teleconverter is worth it. I use it all the time for bird hunting.

Here are my sample shots with the teleconverter attached to my 70-200 lens:

Tuesday, April 19, 2011

The flowing liquid shot

Ever wonder how they do those flowing liquid shots in ads?

It's a combination of high speed shutter, and the perfect lighting that makes an awesome flowing liquid shot. I myself am so addicted to doing it I spend hours every night just to get that perfect shot.

It's really simple to do. It's almost the same setting as the high speed water splash shot that I discussed here. You basically need about 2 strobes, actually 1 would do, but I prefer the background lit up by an independent strobe. For my shots I use 4.

For these shots I use:

4 strobes, 3 with softboxes, 1 with a shoot through umbrella
a tripod
a macro lens, or a lens that can do closeups
a white background
a waterproof mat
shutter release if you want

I set my camera to a narrow aperture...around f11 or more. This will prevent you from going out of focus when you take a shot of the flowing liquid that moves. Powerful lights are necessary for you to set your aperture to a narrow setting, that's why I use 4. I then set my speed to around 200/sec. My camera has a sync speed of 250/sec maximum to the flash, I use 200 because I want a little bit of room just in case the 250/sec darkens my corners a bit. Better if you have high speed lights...I don't so I'll stick to my 200/sec setting. When I'm in my studio, I always set my camera to ISO 100, the lowest I can go for my camera...heck if I have ISO 50 I would go for that. As you all know, this prevents noise in any shots.

A very good practice when taking these kinds of shots is to estimate where the flow of liquid would go...grab a pen, position the tip where you think the liquid will flow, then use your manual focus to focus on that spot. Make sure that your camera is in a tripod...as it is impossible to do this handheld.

The light are positioned like this...1 overhead light with a softbox, 1 pointed at the background with a softbox, 1 on the left side with a softbox, 1 on the right with an umbrella. Main light would be either on the left or right side. Make sure the background light has enough light to blow out the highlights.

For this, I set my self timer then poured the liquid when it's about time to fire...you can use a shutter release, anything you prefer is fine.

Wednesday, April 13, 2011

High speed water splash shot

I wanted to do something fun today so I decided to do a water splash shot. When you photograph water splashes, you know that you are supposed to use a fast shutter speed. Actually the maximum sync speed you have will work...you really don't have to set it up above 250th of a second. Your flash will pause the water splash moment when you press on the shutter.

I have 4 strobe lights in my studio...none of them support the high speed function. My 430ex II flashes does support it, although I need a master that would trigger them both...a master that does have high speed sync built in it, too bad I don't have that. I'm not also willing to spend thousands of dollars for high speed strobes that enable you to capture the path of a bullet...I know I'm not gonna use it that often. So I just used whatever I have.

So I set up 4 strobes. 3 with softboxes and my main light had a shoot through umbrella. 1 shot the background, 2 from each side, and 1 above. So now I have enough light to capture my subject. I set my camera in a tripod, set my aperture at f11, my ISO at 100 and my speed to 200. I set my focus to manual and then focused approximately halfway through the glass.

I dropped my strawberry in the glass and pressed my shutter release at the same time...and I nail the shot!




200/sec isn't really that bad. If you can set up flashes with High speed sync, you can actually shoot however fast you want, although the flash power will be greatly limited the faster you go, this is better though because your flash fires shorter. For shots like this, it really does not matter that much because your flash will pause that moment when you press on your shutter. My settings worked for me so I'll go with that.